Tools & Cases
TP1488 Single Position Head
$121.25This single position head (EDMO# TP1488) is used with the FT8 crimp tool and adapts the tool frame to a particular application. The data plate on the positioner designates which contacts the single position head accommodates...
TH286 Turret Head | Daniels Crimp Tools
$180.58This turret head (EDMO# TH286) is used with the AF8, WA27F, and AFE8B tool frames and adapt the tool frames to a particular application. The data plate on each turret head designates...
Safe-T-Cable Torque Verification Block | 0.022", 0.032", 0.040", Right Hand
$298.90Torque verification blocks allow for the verification of Safety-T-Cable tools. Tensioning mechanisms are verified using the Safe-T-Cable torque verification block and a push force tester.Torque verification block (EDMO# SCT-TB1R) configured...
SCT-TB1 Torque Verification Block | For 0.022", 0.032", and 0.040" Safe-T-Cable
$461.40Periodic verification of tool indenter and tensioning mechanism settings is done with the Safe-T-Cable(c) Torque Verification Block. Indenter setting should be verified periodically and must always be checked if the nose...
Safe-T-Cable Nose Assembly | 3-inch, For 0.032-inch Safe-T-Cable Assemblies
$400.49Safe-T-Cable nose assemblies rotate 360° and are available in 1”, 3”, 5”, 7”, and 9” lengths. Low-profile noses are available for applications where the clearance between the fastener head and...
DANIELS CRIMP TOOL/M22520/7-01. Dies sold separately.
$907.83Qualified to MIL-DTL-22520/7, the DMC MH860 is a recent addition to the military specification. It was developed to meet the demonstrated need for supporting the majority of electrical systems with...