DANIELS MFG
AF8 Crimp Tool Turret Head
$324.71The M22520/1-02 (EDMO# TH1A) turret head is used with the M22520/1-01 (AF8) tool frame and adapts the tool frame to a particular application. The data plate on each turret head...
Safe-T-Cable Nose Assembly | 3-inch, For 0.032-inch Safe-T-Cable Assemblies
$400.49Safe-T-Cable nose assemblies rotate 360° and are available in 1”, 3”, 5”, 7”, and 9” lengths. Low-profile noses are available for applications where the clearance between the fastener head and...
Safe-T-Cable Torque Verification Block | 0.022", 0.032", 0.040", Right Hand
$298.90Torque verification blocks allow for the verification of Safety-T-Cable tools. Tensioning mechanisms are verified using the Safe-T-Cable torque verification block and a push force tester.Torque verification block (EDMO# SCT-TB1R) configured...
SCT-TB1 Torque Verification Block | For 0.022", 0.032", and 0.040" Safe-T-Cable
$300.28Periodic verification of tool indenter and tensioning mechanism settings is done with the Safe-T-Cable(c) Torque Verification Block. Indenter setting should be verified periodically and must always be checked if the nose...
DANIELS CRIMP TOOL/M22520/7-01. Dies sold separately.
$729.48Qualified to MIL-DTL-22520/7, the DMC MH860 is a recent addition to the military specification. It was developed to meet the demonstrated need for supporting the majority of electrical systems with...
M81969/14-12 Insertion/Removal Tool | Size 8 Contacts, Green/White
$38.46The M819691412 extraction tool is designed to remThe M81969/14-12 insertion and removal tool is used to install size 8 pin & socket contacts into the connector housings.
M81969/14-09 Pin & Socket Installation & Extraction Tool | Size 22 Contacts, Brown & White
$30.25The M81969/14-09 installation and extraction tool is used to allows technicians to service size 22 pin & socket contacts in connector housings.
M81969/14-08 Extraction Tool | Size 0 Contacts, Yellow
$32.46The M81969/14-08 extraction tool is designed to remove size 0 contacts from the connector housing.