DANIELS MFG

Periodic verification of tool indenter and tensioning mechanism settings is done with the Safe-T-Cable(c) Torque Verification Block. Indenter setting should be verified periodically and must always be checked if the nose...

Safe-T-Cable nose assemblies rotate 360° and are available in 1”, 3”, 5”, 7”, and 9” lengths. Low-profile noses are available for applications where the clearance between the fastener head and...

Qualified to MIL-DTL-22520/7, the DMC MH860 is a recent addition to the military specification. It was developed to meet the demonstrated need for supporting the majority of electrical systems with...

The M819691412 extraction tool is designed to remThe M81969/14-12 insertion and removal tool is used to install size 8 pin & socket contacts into the connector housings. 

The M81969/14-08 extraction tool is designed to remove size 0 contacts from the connector housing. 

The M81969/14-07 extraction tool is designed to remove size #4 contacts from the connector housing.

The M81969/14-02 insertion and removal tool is used to install size 10 pin & socket contacts into the connector housings. 

This go-no-go gauge (EDMO# M22520/3-2) is used with the GS100-1 Circular Indent Crimp Tool and has a gage range of 0.0960 (GO) to 0.1000 (NO-GO).

Insertion/removal tool for electrical contacts. This tool (M15570-221) is for 22 gauge contacts, has plastic tips, and colored yellow and white.

CRIMP TOOL W/LH281 TURRET HEAD

This positioner (EDMO# K880) is used with the AFM8, AFME8B, WA22 crimp tools and adapts the tool frame to a particular application. The data plate on each positioner designates which contacts the positioner accommodates for its...