BILD INDUSTRIES
U-type Tinnerman Speed Nuts | #6 Screw, 0.025–0.064in Panels
$3.49Tinnerman U-type nuts snap into position over a panels edge and are ideal in blind or hard to reach locations without requiring welding or riveting. They are constructed of aircraft...
Cadium-Plated Steel Sheet Metal Screw | 3/8-in, #8 Type A Thread
$0.38These truss head screws are self-tapping and machined from cadmium-plated, stainless steel.This trusshead Phillips tapping screw (EDMO# 8RX3/8THA) is made from cadmium-plated stainless steel, has a 3/8-inch length, and a...
Stainless Steel Sheet Metal Screw | 1/2-in, #6 Type A Threads
$0.38These truss head screws are self-tapping and machined from stainless steel. This trusshead Phillips tapping screw (EDMO# 6RX1/2THA) is made from stainless steel, has a 1/2-inch length, and a #6 thread...
AN526C832R8 Truss Head Machine Screw | 8-32 Thread, 1/2-inch Length, 0.384-inch Phillips Head
$0.48This AN526C series truss head machine screw (EDMO# 526C832R8) has 8-32 threads, a 0.384-inch Phillips head, and is 1/2-inch in length. It is also made of stainless steel.
Truss Head Machine Screw | 8-32 Thread, 7/16-inch Length, 3/8-inch Phillips Head
$28.08This truss head machine screw (EDMO# 526C832R7) has 8-32 threads, a 3/8-inch Phillips head, and is 7/16-inch in length. It is also made of cadmium plated steel.
AN526C832R6 Truss Head Machine Screw | 8-32 Thread, 3/8-inch Length, 0.384-inch Phillips Head
$0.50This AN526C series truss head machine screw (EDMO# 526C832R6) has 8-32 threads, a 0.384-inch Phillips head, and is 3/8-inch in length. It is also made of stainless steel.
AN526C832R4 Truss Head Machine Screw | 8-32 Thread, 1/4-inch Length, 0.384-inch Phillips Head
$0.56This AN526C series truss head machine screw (EDMO# 526C832R4) has 8-32 threads, a 0.384-inch Phillips head, and is 1/4-inch in length. It is also made of stainless steel.
AN526C832R10 Truss Head Machine Screw | 8-32 Thread, 5/8-inch Length, 0.384-inch Phillips Head
$0.57This AN526C series truss head machine screw (EDMO# 526C832R10) has 8-32 threads, a 0.384-inch Phillips head, and is 5/8-inch in length. It is also made of stainless steel.
AN526C632R8 Truss Head Machine Screw | 6-32 Thread, 1/2-inch Length, 0.321-inch Phillips Head
$0.47This AN526C series truss head machine screw (EDMO# 526C632R8) has 6-32 threads, a 0.321-inch Phillips head, and is 1/2-inch in length. It is also made of stainless steel.