{"title":"GPS NETWORKING","description":"","products":[{"product_id":"12attenpdc-test-equipment-edmo-edmo","title":"Fixed GPS Signal Attenuator | 12 dB Attenuation, DC Pass-thru, N Connector","description":"\u003cp\u003eThe XXATTENPDC fixed GPS attenuator is a one input and one output device that allows DC voltage to pass from the J1 port through the antenna port to provide power to an active antenna. This unit is designed to cover all major GNSS constellations with excellent gain flatness. The unregulated voltage that is passed through can power other upstream device including active antennas.This DC pass-thru fixed GPS attenuator (EDMO# 12ATTENPDC) will lessen GPS signal 12 dB and has N-type connectors. \u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602312630587,"sku":"12ATTENPDC","price":214.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/12attenpdc_12attenpdc-jpg.jpg?v=1758591322"},{"product_id":"adapter-n-test-equipment-edmo-edmo","title":"N-male to SMA-male Adapter | For HNRRKIT-110 Re-Radiating Kit","description":"\u003cp\u003eThis N-connector to SMA-connector adapter facilitates with the installation of the HNRRKIT-110 re-radiating kit. \u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602697294139,"sku":"ADAPTER-N","price":63.0,"currency_code":"USD","in_stock":true}]},{"product_id":"aldcbs1x2-test-equipment-edmo-edmo","title":"Amplified GPS Splitter | 1 input, 2 output, N-type Connector","description":"\u003cp\u003eThis amplified loaded DC blocked GPS splitter features one input and two output for spitting RF frequencies from 1.1 GHz — 1.7 GHz. It is designed to amplify and split the L-band frequency to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults. This amplified GPS splitter (EDMO# ALDCBS1X2) features one input and two outputs, N-type female connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602702340411,"sku":"ALDCBS1X2","price":540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/aldcbs1x2_amplified-antenna-splitter-with-n-connector-1292641267.jpg?v=1758597753"},{"product_id":"aldcbs1x2b-test-equipment-edmo-edmo","title":"Amplified GPS Antenna Splitter | 2 Outputs, 1 Input, BNC Connectors","description":"\u003cp\u003eThe ALDCBS1X2 GPS amplified splitter has one input and two outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L-band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. The other RF output (J2) is DC blocked and incorporates a 200 resistor to simulate the antenna current draw preventing false antenna alarm faults.This ALDCBS1X2 GPS amplified splitter (EDMO# ALDCBS1X2B) includes one input and two outputs, each with BNC connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602702373179,"sku":"ALDCBS1X2B","price":474.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/aldcbs1x2b_amplified-gps-antenna-splitter-2-outputs-1-input-bnc-connectors2044558102.jpg?v=1758597755"},{"product_id":"aldcbs1x2s-test-equipment-edmo-edmo","title":"Amplified GPS Antenna Splitter | 2 Outputs, 1 Input, BNC Connectors","description":"\u003cp\u003eThe ALDCBS1X2 GPS amplified splitter has one input and two outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L-band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna allowing the GPS receiver to power both the antenna and the splitter’s internal amplifier. The other RF output (J2) is DC blocked and incorporates a 200Ω resistor to simulate the antenna current draw preventing false antenna alarm faults.This ALDCBS1X2 GPS amplified splitter (EDMO# ALDCBS1X2S) includes one input and two outputs each with BNC connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602702405947,"sku":"ALDCBS1X2S","price":474.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/aldcbs1x2s_amplified-gps-antenna-splitter-2-outputs-1-input-bnc-connectors-843521481.jpg?v=1758597755"},{"product_id":"aldcbs1x2t-test-equipment-edmo-edmo","title":"Amplified GPS Antenna Splitter | 2 Outputs, 1 Input, TNC Connectors","description":"\u003cp\u003eThe ALDCBS1X2 GPS amplified splitter has one input and two outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L-band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. The other RF output (J2) is DC blocked and incorporates a 200 resistor to simulate the antenna current draw preventing false antenna alarm faults.This ALDCBS1X2 GPS amplified splitter (EDMO# ALDCBS1X2T) includes one input and two outputs each with TNC connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602702471483,"sku":"ALDCBS1X2T","price":540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/aldcbs1x2t_amplified-gps-antenna-splitter-2-outputs-1-input-tnc-connectors-724248295.jpg?v=1758597759"},{"product_id":"aldcbs1x4-test-equipment-edmo-edmo","title":"Amplified GPS Splitter | 1 Input, 4 Output, N-type Female","description":"\u003cp\u003eThese amplified GPS splitters feature one input and four outputs for spitting RF frequencies from 1.1 GHz — 1.7 GHz. It is designed to amplify and split the L-band frequency to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2 – J4, are DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults. This amplified GPS splitter (EDMO# ALDCBS1X4) features one input and four outputs, N-type female connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602702504251,"sku":"ALDCBS1X4","price":646.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/aldcbs1x4_amplified-gps-splitter-with-n-connector--1107963272.jpg?v=1758597760"},{"product_id":"aldcbs1x4b-test-equipment-edmo-edmo","title":"Amplified GPS Antenna Splitter | 4 Outputs, 1 Input, BNC Connectors","description":"\u003cp\u003eThe ALDCBS1X4 GPS amplified splitter has one input and four outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L-band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. Each RF output (J2-J4) are DC blocked and incorporates a 200 resistor to simulate the antenna current draw preventing false antenna alarm faults.This ALDCBS1X4 GPS amplified splitter (EDMO# ALDCBS1X4B) includes one input and four outputs each with BNC connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602702537019,"sku":"ALDCBS1X4B","price":646.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/aldcbs1x4b_amplified-gps-antenna-splitter-4-outputs-1-input-bnc-connects628213430.jpg?v=1758597761"},{"product_id":"aldcbs1x4s-test-equipment-edmo-edmo","title":"Amplified GPS Antenna Splitter | 4 Outputs, 1 Input, SMA Connectors","description":"\u003cp\u003eThe ALDCBS1X4 GPS amplified splitter has one input and four outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L-band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. Each RF output (J2-J4) are DC blocked and incorporates a 200 resistor to simulate the antenna current draw preventing false antenna alarm faults.This ALDCBS1X4 GPS amplified splitter (EDMO# ALDCBS1X4S) includes one input and four outputs each with SMA connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602702635323,"sku":"ALDCBS1X4S","price":646.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/aldcbs1x4s_amplified-gps-antenna-splitter-4-outputs-1-input-sma-connectors1069692210.jpg?v=1758597764"},{"product_id":"aldcbs1x4t-antennas-edmo","title":"Amplified GPS Antenna Splitter | 4 Outputs, 1 Input, TNC Connectors","description":"\u003cp\u003eThe ALDCBS1X4 GPS amplified splitter has one input and four outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L-band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. Each RF output (J2-J4) are DC blocked and incorporates a 200 resistor to simulate the antenna current draw preventing false antenna alarm faults.This ALDCBS1X4 GPS amplified splitter (EDMO# ALDCBS1X4T) includes one input and four outputs each with TNC connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602702668091,"sku":"ALDCBS1X4T","price":583.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/aldcbs1x4t_amplified-gps-antenna-splitter-4-outputs-1-input-tnc-connects1788016992.jpg?v=1758597765"},{"product_id":"aldcbs1x8-test-equipment-edmo-edmo","title":"Amplified GPS Splitter | 1 Input, 8 Outputs, N-type Connectors","description":"\u003cp\u003eThis amplified loaded DC blocked GPS splitter features one input and two output for spitting RF frequencies from 1.1 GHz — 1.7 GHz. It is designed to amplify and split the L-band frequency to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults. This amplified GPS splitter (EDMO# ALDCBS1X8) features one input and eight outputs, N-type female connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602702700859,"sku":"ALDCBS1X8","price":1132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/aldcbs1x8_amplified-antenna-splitter-with-n-connector-1540839619.jpg?v=1758597765"},{"product_id":"aldcbs1x8b-test-equipment-edmo-edmo","title":"Amplified GPS Antenna Splitter | 8 Outputs, 1 Input, BNC Connectors","description":"\u003cp\u003eThe ALDCBS1X8 GPS amplified splitter has one input and eight outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L-band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. Each RF output (J2-J8) are DC blocked and incorporates a 200 resistor to simulate the antenna current draw preventing false antenna alarm faults.This ALDCBS1X8 GPS amplified splitter (EDMO# ALDCBS1X8B) includes one input and eight outputs each with BNC connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602702733627,"sku":"ALDCBS1X8B","price":1132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/aldcbs1x8b_amplified-gps-antenna-spltter-8-outputs-1-input-bnc-connectors1076985864.jpg?v=1758597766"},{"product_id":"aldcbs1x8s-test-equipment-edmo-edmo","title":"Amplified GPS Antenna Splitter | 8 Outputs, 1 Input, SMA Connectors","description":"\u003cp\u003eThe ALDCBS1X8 GPS amplified splitter has one input and eight outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L-band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. Each RF output (J2-J8) are DC blocked and incorporates a 200 resistor to simulate the antenna current draw preventing false antenna alarm faults.This ALDCBS1X8 GPS amplified splitter (EDMO# ALDCBS1X8S) includes one input and eight outputs each with SMA connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602702766395,"sku":"ALDCBS1X8S","price":1132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/aldcbs1x8s_amplified-gps-antenna-splitter-8-outputs-1-input-sma-connect192816532.jpg?v=1758597769"},{"product_id":"aldcbs1x8t-test-equipment-edmo-edmo","title":"Amplified GPS Antenna Splitter | 8 Outputs, 1 Input, TNC Connectors","description":"\u003cp\u003eThe ALDCBS1X8 GPS amplified splitter has one input and eight outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L-band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. Each RF output (J2-J8) are DC blocked and incorporates a 200 resistor to simulate the antenna current draw preventing false antenna alarm faults.This ALDCBS1X8 GPS amplified splitter (EDMO# ALDCBS1X8T) includes one input and eight outputs each with TNC connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602702799163,"sku":"ALDCBS1X8T","price":1194.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/aldcbs1x8t_amplified-gps-antenna-splitter-8-outputs-1-input-tnc-connectors-1036253088.jpg?v=1758597770"},{"product_id":"dcb-s-test-equipment-edmo-edmo","title":"DC-BLOCK, IN-LINE, SMA Connector","description":"","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602771480891,"sku":"DCB-S","price":154.24,"currency_code":"USD","in_stock":true}]},{"product_id":"eldcbs1x2t-test-equipment-edmo-edmo","title":"EMI Shielded Passive GPS Antenna Splitter | 1 Input, 2 Output, TNC Connector","description":"\u003cp\u003eThese passive GPS splitters feature one input and two outputs for spitting RF frequencies from 1.1 GHz — 1.7 GHz. It is designed to passively split the L-band frequency to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2, is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevents alarm faults. This passive GPS antenna splitter (EDMO# ELDCBS1X2T) features one input and two outputs, TNC connectors; it also features EMI shielding. \u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602782916923,"sku":"ELDCBS1X2T","price":540.0,"currency_code":"USD","in_stock":true}]},{"product_id":"gps-its-test-equipment-edmo-edmo","title":"GPS-ITS Indoor Testing Solutions","description":"\u003cp\u003eThe GPS ITS indoor testing solution allows re-radiation of GPS L1 signals indoors. This kit includes an active roof antenna, a re-radiating amplifier with wall mount and plugin transformer to power the entire system, as well as a passive re-radiating antenna. GPS receivers will be able to receive GPS signals within 100 feet of the re-radiating antenna of line-of-sight.This product is only to be used for testing GNSS equipment\/systems for the purpose of product development or fabrication.Per the latest FCC guidance, the following use cases are NOT allowed:Fire Stations \u0026amp; First RespondersAircraft Repair and MaintenanceTruck Repair and MaintenanceAny other usages which could be considered \"maintenance\". An FCC Experimental Broadcast license is required to operate this device, with the following exceptions:Device is operated in a shielded environment, such as an anechoic chamber.Device is operated in conjunction with a reradiating hood.Device is operated by federal or DoD personnel with the approval of the local spectrum manager.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602796679483,"sku":"GPS-ITS","price":1318.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/gps-its_gps-its-jpg-644698507.jpg?v=1758600743"},{"product_id":"hialdcbs4-test-equipment-edmo-edmo","title":"High Isolated Amplified Loaded DC Blocked Splitter | 1 input, 4 output, TNC connector","description":"\u003cp\u003eThis Military Qualified High Isolated Amplified Loaded DC Blocked Splitter 1X4 (MIL-HIALDCBS1X4)is a high isolated, active, one input, four output RF splitter that splits signals from 1.1 GHz to 1.7 GHz.This equipment is designed to amplify and split signals within the L-band to provide multiple deviceswith the signal from a single antenna. Each output port (J1-J4) is isolated from external signals toprevent interference. In the standard configuration, the J1 port will pass DC voltage from a connecteddevice and pass this power to the antenna or other devices upline from the splitter via the antennaport. The other ports (J2-J4) are DC blocked and loaded with 200Ω resistors to simulate antennacurrent draw which prevents antenna alarm faults. All MIL-Spec splitters are qualified to the rigorousMIL-STD 810F environmental \u0026amp; MIL-STD-461F EMI standards. Custom gain configuration, DCconfiguration, and connector configuration are available upon request.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602808639803,"sku":"HIALDCBS4","price":772.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/hialdcbs4.jpg?v=1758600976"},{"product_id":"hnrrkit-1b-test-equipment-edmo-edmo","title":"Hanger Networked Re-Radiating Kit | BNC Connectors, 110V Source Input","description":"\u003cp\u003eThis GPS re-radiating kit is designed for distributing GPS signals inside a hanger or large spaces without obstruction. GPS L1 signals is received by the include roof antenna, amplified, and then re-radiated indoors using the passive antenna. This hanger GPS re-radiating system consists of an active roof-top antenna, a passive re-radiating antenna, and amplifier with external power supply to power the entire system. In the standard network configuration, the amplifier output (J1) is DC blocked while the antenna port provides DC voltage to power the roof antenna.This hanger GPS re-radiating kit (EDMO# HNRRKIT-1B) features BNC-type connectors, operates from a 110-volt power source. DOES NOT INCLUDE: WRUMTamplifier mount, RAMB-L1antenna mounting bracket, LMR400\/1braided coax cable, or (2) RFB1106-IBNC male crimp\/coax connector. These parts are recommended and sold separately. This product is only to be used for testing GNSS equipment\/systems for the purpose of product development or fabrication.Per the latest FCC guidance, the following use cases are NOT allowed:Fire Stations \u0026amp; First RespondersAircraft Repair and MaintenanceTruck Repair and MaintenanceAny other usages which could be considered \"maintenance\". An FCC Experimental Broadcast license is required to operate this device, with the following exceptions:Device is operated in a shielded environment, such as an anechoic chamber.Device is operated in conjunction with a reradiating hood.Device is operated by federal or DoD personnel with the approval of the local spectrum manager.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602816340283,"sku":"HNRRKIT-1B","price":961.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/hnrrkit-1b_gps-re-radiation-kit-110v-bnc-connector.jpg?v=1758601258"},{"product_id":"hnrrkit-1s-test-equipment-edmo-edmo","title":"Hanger Networked Re-Radiating Kit | SMA Connectors, 110V Source Input","description":"\u003cp\u003eThis GPS re-radiating kit is designed for distributing GPS signals inside a hanger or large spaces without obstruction. GPS L1 signals is received by the include roof antenna, amplified, and then re-radiated indoors using the passive antenna. This hanger GPS re-radiating system consists of an active roof-top antenna, a passive re-radiating antenna, and amplifier with external power supply to power the entire system. In the standard network configuration, the amplifier output (J1) is DC blocked while the antenna port provides DC voltage to power the roof antenna.This hanger GPS re-radiating kit (EDMO# HNRRKIT-1S) features SMA-type connectors, operates from a 110-volt power source. DOES NOT INCLUDE: WRUMTamplifier mount, RAMB-L1antenna mounting bracket, LMR400\/1braided coax cable, or (2) RSA3000-I SMA male crimp\/coax connector. These parts are recommended and sold separately. This product is only to be used for testing GNSS equipment\/systems for the purpose of product development or fabrication.Per the latest FCC guidance, the following use cases are NOT allowed:Fire Stations \u0026amp; First RespondersAircraft Repair and MaintenanceTruck Repair and MaintenanceAny other usages which could be considered \"maintenance\". An FCC Experimental Broadcast license is required to operate this device, with the following exceptions:Device is operated in a shielded environment, such as an anechoic chamber.Device is operated in conjunction with a reradiating hood.Device is operated by federal or DoD personnel with the approval of the local spectrum manager.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602816373051,"sku":"HNRRKIT-1S","price":898.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/hnrrkit-1s_gps-re-radiating-kit-110v-sma-connector.jpg?v=1758601258"},{"product_id":"hnrrkit-1t-test-equipment-edmo-edmo","title":"Hanger Networked Re-Radiating Kit | TNC Connectors, 110V Source Input","description":"\u003cp\u003eThis GPS re-radiating kit is designed for distributing GPS signals inside a hanger or large spaces without obstruction. GPS L1 signals is received by the include roof antenna, amplified, and then re-radiated indoors using the passive antenna. This hanger GPS re-radiating system consists of an active roof-top antenna, a passive re-radiating antenna, and amplifier with external power supply to power the entire system. In the standard network configuration, the amplifier output (J1) is DC blocked while the antenna port provides DC voltage to power the roof antenna.This hanger GPS re-radiating kit (EDMO# HNRRKIT-1T) features TNC-type connectors, operates from a 110-volt power source. DOES NOT INCLUDE: WRUMTamplifier mount, RAMB-L1antenna mounting bracket, LMR400\/1braided coax cable, or (2) RFT1202-I TNC male crimp\/coax connector. These parts are recommended and sold separately. This product is only to be used for testing GNSS equipment\/systems for the purpose of product development or fabrication.Per the latest FCC guidance, the following use cases are NOT allowed:Fire Stations \u0026amp; First RespondersAircraft Repair and MaintenanceTruck Repair and MaintenanceAny other usages which could be considered \"maintenance\". An FCC Experimental Broadcast license is required to operate this device, with the following exceptions:Device is operated in a shielded environment, such as an anechoic chamber.Device is operated in conjunction with a reradiating hood.Device is operated by federal or DoD personnel with the approval of the local spectrum manager.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602816405819,"sku":"HNRRKIT-1T","price":961.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/hnrrkit-1t_gps-re-radiating-kit-110v-tnc-connector.jpg?v=1758601259"},{"product_id":"hnrrkit-2b-test-equipment-edmo-edmo","title":"Hanger Networked Re-Radiating Kit | BNC Connectors, 220V Source Input","description":"\u003cp\u003eThis GPS re-radiating kit is designed for distributing GPS signals inside a hanger or large spaces without obstruction. GPS L1 signals is received by the include roof antenna, amplified, and then re-radiated indoors using the passive antenna. This hanger GPS re-radiating system consists of an active roof-top antenna, a passive re-radiating antenna, and amplifier with external power supply to power the entire system. In the standard network configuration, the amplifier output (J1) is DC blocked while the antenna port provides DC voltage to power the roof antenna.This hanger GPS re-radiating kit (EDMO# HNRRKIT-2B) features BNC-type connectors, operates from a 220-volt power source. DOES NOT INCLUDE: WRUMT amplifier mount, RAMB-L1 antenna mounting bracket, LMR400\/1 braided coax cable, or (2) RFB1106-I BNC male crimp\/coax connector. These parts are recommended and sold separately. This product is only to be used for testing GNSS equipment\/systems for the purpose of product development or fabrication.Per the latest FCC guidance, the following use cases are NOT allowed:Fire Stations \u0026amp; First RespondersAircraft Repair and MaintenanceTruck Repair and MaintenanceAny other usages which could be considered \"maintenance\". An FCC Experimental Broadcast license is required to operate this device, with the following exceptions:Device is operated in a shielded environment, such as an anechoic chamber.Device is operated in conjunction with a reradiating hood.Device is operated by federal or DoD personnel with the approval of the local spectrum manager.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602816471355,"sku":"HNRRKIT-2B","price":898.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/hnrrkit-2b_gps-re-radiating-kit-220v-bnc-connector.jpg?v=1758601263"},{"product_id":"hnrrkit-2s-test-equipment-edmo-edmo","title":"Hanger Networked Re-Radiating Kit | SMA Connectors, 220V Source Input","description":"\u003cp\u003eThis GPS re-radiating kit is designed for distributing GPS signals inside a hanger or large spaces without obstruction. GPS L1 signals is received by the include roof antenna, amplified, and then re-radiated indoors using the passive antenna. This hanger GPS re-radiating system consists of an active roof-top antenna, a passive re-radiating antenna, and amplifier with external power supply to power the entire system. In the standard network configuration, the amplifier output (J1) is DC blocked while the antenna port provides DC voltage to power the roof antenna.This hanger GPS re-radiating kit (EDMO# HNRRKIT-2S) features SMA-type connectors, operates from a 220-volt power source. DOES NOT INCLUDE: WRUMT amplifier mount, RAMB-L1 antenna mounting bracket, LMR400\/1 braided coax cable, or (2) RSA3000-I SMA male crimp\/coax connector. These parts are recommended and sold separately. This product is only to be used for testing GNSS equipment\/systems for the purpose of product development or fabrication.Per the latest FCC guidance, the following use cases are NOT allowed:Fire Stations \u0026amp; First RespondersAircraft Repair and MaintenanceTruck Repair and MaintenanceAny other usages which could be considered \"maintenance\". An FCC Experimental Broadcast license is required to operate this device, with the following exceptions:Device is operated in a shielded environment, such as an anechoic chamber.Device is operated in conjunction with a reradiating hood.Device is operated by federal or DoD personnel with the approval of the local spectrum manager.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602816504123,"sku":"HNRRKIT-2S","price":898.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/hnrrkit-2s_gps-re-radiating-kit-220v-sma-connector.jpg?v=1758601264"},{"product_id":"hnrrkit-2t-test-equipment-edmo-edmo","title":"Hanger Networked Re-Radiating Kit | TNC Connectors, 220V Source Input","description":"\u003cp\u003eThis GPS re-radiating kit is designed for distributing GPS signals inside a hanger or large spaces without obstruction. GPS L1 signals is received by the include roof antenna, amplified, and then re-radiated indoors using the passive antenna. This hanger GPS re-radiating system consists of an active roof-top antenna, a passive re-radiating antenna, and amplifier with external power supply to power the entire system. In the standard network configuration, the amplifier output (J1) is DC blocked while the antenna port provides DC voltage to power the roof antenna.This hanger GPS re-radiating kit (EDMO# HNRRKIT-2T) features TNC-type connectors, operates from a 220-volt power source. DOES NOT INCLUDE: WRUMT amplifier mount, RAMB-L1 antenna mounting bracket, LMR400\/1 braided coax cable, or (2) RFT1202-I TNC male crimp\/coax connector. These parts are recommended and sold separately. This product is only to be used for testing GNSS equipment\/systems for the purpose of product development or fabrication.Per the latest FCC guidance, the following use cases are NOT allowed:Fire Stations \u0026amp; First RespondersAircraft Repair and MaintenanceTruck Repair and MaintenanceAny other usages which could be considered \"maintenance\". An FCC Experimental Broadcast license is required to operate this device, with the following exceptions:Device is operated in a shielded environment, such as an anechoic chamber.Device is operated in conjunction with a reradiating hood.Device is operated by federal or DoD personnel with the approval of the local spectrum manager.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602816536891,"sku":"HNRRKIT-2T","price":961.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/hnrrkit-2t_gps-re-radiating-kit-220v-tnc-connector.jpg?v=1758601264"},{"product_id":"hnrrkit110-test-equipment-edmo-edmo","title":"L1 GPS Hangar Networked Re-Radiating Kit | 110V, N Connector","description":"\u003cp\u003eThe HNRRKIT hangar network system re-radiates a GPS L1 signal indoors creating a perfect environment for a custom GPS network. The re-radiating amplifier is able to receive a GPS line of sight signal up to 100 feet. The HNRRKIT110 consists of an active roof antenna, a re-radiating amplifier with a wall mount plug-in transformer that powers the entire system, and a passive re-radiating antenna.This product is only to be used for testing GNSS equipment\/systems for the purpose of product development or fabrication.Per the latest FCC guidance, the following use cases are NOT allowed:Fire Stations \u0026amp; First RespondersAircraft Repair and MaintenanceTruck Repair and MaintenanceAny other usages which could be considered \"maintenance\". An FCC Experimental Broadcast license is required to operate this device, with the following exceptions:Device is operated in a shielded environment, such as an anechoic chamber.Device is operated in conjunction with a reradiating hood.Device is operated by federal or DoD personnel with the approval of the local spectrum manager.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602816602427,"sku":"HNRRKIT110","price":961.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/hnrrkit110_l1-gps-hangar-network-re-radiating-kit-110v-n-connector-5691873.jpg?v=1758601265"},{"product_id":"hnrrkit220-test-equipment-edmo-edmo","title":"Hanger Networked Re-Radiating Kit | N Connectors, 220V Source Input","description":"\u003cp\u003eThis GPS re-radiating kit is designed for distributing GPS signals inside a hanger or large spaces without obstruction. GPS L1 signals is received by the include roof antenna, amplified, and then re-radiated indoors using the passive antenna. This hanger GPS re-radiating system consists of an active roof-top antenna, a passive re-radiating antenna, and amplifier with external power supply to power the entire system. In the standard network configuration, the amplifier output (J1) is DC blocked while the antenna port provides DC voltage to power the roof antenna.This hanger GPS re-radiating kit (EDMO# HNRRKIT220) features N-type connectors, operates from a 220-volt power source. DOES NOT INCLUDE: WRUMTamplifier mount, RAMB-L1antenna mounting bracket, LMR400\/1braided coax cable, or (2) RFN1006-3IN male dual crimp\/coax connector. These parts are recommended and sold separately.This product is only to be used for testing GNSS equipment\/systems for the purpose of product development or fabrication.Per the latest FCC guidance, the following use cases are NOT allowed:Fire Stations \u0026amp; First RespondersAircraft Repair and MaintenanceTruck Repair and MaintenanceAny other usages which could be considered \"maintenance\". An FCC Experimental Broadcast license is required to operate this device, with the following exceptions:Device is operated in a shielded environment, such as an anechoic chamber.Device is operated in conjunction with a reradiating hood.Device is operated by federal or DoD personnel with the approval of the local spectrum manager.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602816635195,"sku":"HNRRKIT220","price":961.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/hnrrkit220_gps-re-radiating-kit-220v-n-connector-2072628070.jpg?v=1758601268"},{"product_id":"hnrrkit240-test-equipment-edmo-edmo","title":"Hanger Networked Re-Radiating Kit | UK Plug, N Connectors, 240V Source Input","description":"\u003cp\u003eThis GPS re-radiating kit is designed for distributing GPS signals inside a hanger or large spaces without obstruction. GPS L1 signals is received by the include roof antenna, amplified, and then re-radiated indoors using the passive antenna. This hanger GPS re-radiating system consists of an active roof-top antenna, a passive re-radiating antenna, and amplifier with external power supply to power the entire system. In the standard network configuration, the amplifier output (J1) is DC blocked while the antenna port provides DC voltage to power the roof antenna.This hanger GPS re-radiating kit (EDMO# HNRRKIT240) features UK Plugs, N-type connectors, and operates from a 240-volt power source. DOES NOT INCLUDE: WRUMT amplifier mount, RAMB-L1 antenna mounting bracket, LMR400\/1 braided coax cable, or (2) RFN1006-3I N male dual crimp\/coax connector. These parts are recommended and sold separately.This product is only to be used for testing GNSS equipment\/systems for the purpose of product development or fabrication.Per the latest FCC guidance, the following use cases are NOT allowed:Fire Stations \u0026amp; First RespondersAircraft Repair and MaintenanceTruck Repair and MaintenanceAny other usages which could be considered \"maintenance\". An FCC Experimental Broadcast license is required to operate this device, with the following exceptions:Device is operated in a shielded environment, such as an anechoic chamber.Device is operated in conjunction with a reradiating hood.Device is operated by federal or DoD personnel with the approval of the local spectrum manager.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602816667963,"sku":"HNRRKIT240","price":961.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/hnrrkit240.jpg?v=1758601269"},{"product_id":"l1-l2-ramb-test-equipment-edmo-edmo","title":"L1\/L2 Rooftop GPS Mounting Kit | for L1\/L2GPSA-T or L1GPSA-N Antennas, Fits 2-inch Pole","description":"\u003cp\u003eThe L1\/L2 roof top antenna mounting bracket consist of a mounting bracket with a cutout for routing the antenna cable, and hardware for mounting to a two-inch pole. This mounting kit is designed to facilitate the installation of the L1\/L2GPSA-T or L1GPSA-N antenna. \u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602827743547,"sku":"L1\/L2 RAMB","price":78.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/l1_l2_ramb.jpg?v=1758601709"},{"product_id":"l1-l2fpdcn-test-equipment-edmo-edmo","title":"L1\/L2 GPS Band Pass Filter | N-type Connector","description":"\u003cp\u003eThe L1\/L2FPDC GPS band pass filter has one input and one output for providing addition filtering for the L1 and L2 frequency band. In normal configuration, the RF output (J1) passes DC from the connected GPS receiver through the input and onto the antenna, allowing the GPS receiver to power the antenna.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602827776315,"sku":"L1\/L2FPDCN","price":376.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/l2fpdcn_l1_l2fpdcn-jpg.jpg?v=1758601710"},{"product_id":"l1-l2gpsat-test-equipment-edmo-edmo","title":"L1\/L2 Active GPS Rooftop Antenna | TNC Connector","description":"\u003cp\u003eThe L1\/L2GPSA-T is a high-gain, active GPS antenna with multi-GNSS capability designed to meet the stringent AAR environmental standards. This hermetically sealed antenna features a multi-stage LNA and advanced filtering which eliminate adjacent band interference effects.  \u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602827809083,"sku":"L1\/L2GPSAT","price":835.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/l1_l2gpsa-t.jpg?v=1758601710"},{"product_id":"l1-l2grrkp-test-equipment-edmo-edmo","title":"Multi-GNSS Passive High Performance GPS Antenna | Passive, TNC connector","description":"\u003cp\u003eThis passive GPS antenna provides coverage for all the L1\/L2\/L5 Galileo\/Glonass Omnistar frequency bands and is designed to meet AAR environmental standards. It features a multi-stacked patch design covering global GNSS frequencies. This GPS antenna is designed  for application where the active electronics are collocated with the receiver as well as for re-radiating GNSS applications. It is hermetically sealed and AAR tested and approved.This GPS antenna (EDMO# L1\/L2GRRKP) has a TNC connector.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602827841851,"sku":"L1\/L2GRRKP","price":646.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/l2grrkp_l1_l2grrkp-jpg.jpg?v=1758601713"},{"product_id":"l125gpsa-t-test-equipment-edmo-edmo","title":"L125GPSA-T Multi-Band GNSS Active Antenna | 35dB Gain, TNC-Female","description":"\u003cp\u003eL125GPSA-T is a L1-L2-L5 active antenna solution intended to cover all GPS, Galileo, Glonass, BeiDou bands including L-Band correction services coverage. Low profile RHCP, wide band antenna is ideal solution for high-precision applications, such as autonomous vehicle navigation, smart survey devices, and GNSS reradiation.This antenna is built on proprietary Maxtena Helicore(c) technology. This technology provides exceptional pattern control, polarization purity and high efficiency in a very compact form factor. Low axial ratio ensures that the antenna captures RHCP signal well and mitigates the reflected LHCP signals. Antenna ensures high signal-to-noise ratio (SNR) and GNSS signal tracking from all elevation angles in all types of environments. The antenna is ground plane independent and comes with a TNC-female RF connector.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602827874619,"sku":"L125GPSA-T","price":803.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/l125gpsa-t.jpg?v=1758601715"},{"product_id":"l1gpsa-n-test-equipment-edmo-edmo","title":"L1 ROOF ANTENNA\/ACTIVE\/N CONN","description":"\u003cp\u003eL1 Roof antenna, active,  N connector.Re-radiating the GPS signal indoors can be a significant benefit if you perform indoor receiver testing and evaluation, or if you need your GPS system ready on-the-fly when going indoors to outdoors. Efficient and convenient, re-radiation kits transmit real time satellite data throughout your facility to an unlimited number of users. No more multiple cable runs, impedance problems or running outside in foul weather for testing.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602827940155,"sku":"L1GPSA-N","price":343.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/l1gpsa-n_l1-roof-antenna-active-n-conn.jpg?v=1760112569"},{"product_id":"l1gpsa-s-test-equipment-edmo-edmo","title":"L1 GPS Active Roof Antenna | SMA Connector","description":"\u003cp\u003eThe L1GPSA active roof antenna designed to operate on the L1 carrier frequency for timing and synchronization applications. This active antenna maintains excellent performance in harsh environmental conditions. It features high gain, a low noise figure, and low operating current. This L1GPSA active gps antenna (EDMO# L1GPSA-S) as a SMA connector.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602827972923,"sku":"L1GPSA-S","price":343.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/l1gpsa-s_l1-roof-antenna-active.jpg?v=1758601717"},{"product_id":"l1l2grrkpa-test-equipment-edmo-edmo","title":"Multi-GNSS Passive High Performance Antenna | N Connectors","description":"\u003cp\u003eThis passive GPS antenna provides coverage for all the L1\/L2\/L5 Galileo\/Glonass Omnistar frequency bands and is designed to meet AAR environmental standards. It features a multi-stacked patch design covering global GNSS frequencies. This GPS antenna is designed  for application where the active electronics are collocated with the receiver as well as for re-radiating GNSS applications. It is hermetically sealed and AAR tested and approved.This GPS antenna (EDMO# L1L2GRRKPA) has a N connector.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602828005691,"sku":"L1L2GRRKPA","price":646.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/l1l2grrkpa_passive-antenna.jpg?v=1758601729"},{"product_id":"l1rrkpa-b-test-equipment-edmo-edmo","title":"Re-Radiating L1 GPS Passive Antenna | BNC Connector","description":"\u003cp\u003eThe L1RRKPA-B GPS repeater antenna is a passive antenna designed specifically for the GPS L1 carrier frequency. This antenna provides a signal indoors to test GPS equipment.This L1-band gps re-radiating antenna (EDMO# L1RRKPA-B) features a BNC type connector.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602828038459,"sku":"L1RRKPA-B","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/l1rrkpa-b_re-radiating-antenna-bnc-connector.jpg?v=1758601722"},{"product_id":"l1rrkpa-n-test-equipment-edmo-edmo","title":"Re-Radiating L1 GPS Passive Antenna | N Connector","description":"\u003cp\u003eThe L1RRKPA-B GPS repeater antenna is a passive antenna designed specifically for the GPS L1 carrier frequency. This antenna provides a signal indoors to test GPS equipment.This L1-band gps re-radiating antenna (EDMO# L1RRKPA-N) features a N type connector.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602828071227,"sku":"L1RRKPA-N","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/l1rrkpa-n_re-radiating-antenna-n-connector.jpg?v=1758601723"},{"product_id":"l1rrkpa-s-test-equipment-edmo-edmo","title":"Re-Radiating L1 GPS Passive Antenna | SMA Connector","description":"\u003cp\u003eThe L1RRKPA-SGPS repeater antenna is a passive antenna designed specifically for the GPS L1 carrier frequency. This antenna provides a signal indoors to test GPS equipment. This L1-band gps re-radiating antenna (EDMO# L1RRKPA-S) features a SMA type connector.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602828103995,"sku":"L1RRKPA-S","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/l1rrkpa-s_re-radiating-antenna-sma-connector.jpg?v=1758601727"},{"product_id":"l1rrkpa-t-test-equipment-edmo-edmo","title":"Re-Radiating L1 GPS Passive Antenna | TNC Connector","description":"\u003cp\u003eThe L1RRKPA-t GPS repeater antenna is a passive antenna designed specifically for the GPS L1 carrier frequency. This antenna provides a signal indoors to test GPS equipment.This L1-band gps re-radiating antenna (EDMO# L1RRKPA-T) features a TNC type connector.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602828136763,"sku":"L1RRKPA-T","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/l1rrkpa-t_re-radiating-antenna-tnc-connector.jpg?v=1758601727"},{"product_id":"ldcbs1x2-test-equipment-edmo-edmo","title":"Passive GPS Antenna Splitter | 1 input, 2 output, N Connector","description":"\u003cp\u003eThis loaded DC blocked passive splitter features one input and two outputs for splitting gps RF signals from 1.1 GHz to 1.7 GHz. This splitter is designed to deliver GPS signals within the L1 frequency band to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device up to supply power to the antenna or other up device. The other ports (J2—J4) are DC blocked and loaded with a 200Ω resistor which simulates antenna draw to prevent alarm faults. This passive GPS splitter (EDMO# LDCBS1X2) has one input and two output ports and has N connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602829283643,"sku":"LDCBS1X2","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/ldcbs1x2_passive-antenna-splitter-with-n-connector.jpg?v=1758601768"},{"product_id":"ldcbs1x2b-test-equipment-edmo-edmo","title":"Passive GPS Antenna Splitter | 1 Input, 2 Output, BNC Connector","description":"\u003cp\u003eThis loaded DC blocked passive splitter features one input and two outputs for splitting gps RF signals from 1.1 GHz to 1.7 GHz. This splitter is designed to deliver GPS signals within the L1 frequency band to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device up to supply power to the antenna or other up device. The other ports (J2—J4) are DC blocked and loaded with a 200Ω resistor which simulates antenna draw to prevent alarm faults.This passive GPS splitter (EDMO# LDCBS1X2B) has one input and two output ports and has BNC connectors. \u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602829316411,"sku":"LDCBS1X2B","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/ldcbs1x2b_passive-gps-antenna-splitter-2-outputs-1-input-bnc-connectors.jpg?v=1758601768"},{"product_id":"ldcbs1x2s-test-equipment-edmo-edmo","title":"Passive GPS Antenna Splitter | 1 Input, 4 Output, SMA Connector","description":"\u003cp\u003eThis loaded DC blocked passive splitter features one input and four outputs for splitting gps RF signals from 1.1 GHz to 1.7 GHz. This splitter is designed to deliver GPS signals within the L1 frequency band to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device up to supply power to the antenna or other up device. The other ports (J2—J4) are DC blocked and loaded with a 200Ω resistor which simulates antenna draw to prevent alarm faults.This passive GPS splitter (EDMO# LDCBS1X4S) has one input and four output ports and has SMA connectors. \u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602829349179,"sku":"LDCBS1X2S","price":343.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/ldcbs1x2s_passive-gps-antenna-splitter-2-outputs-1-input-sma-connectors.jpg?v=1758601769"},{"product_id":"ldcbs1x2t-test-equipment-edmo-edmo","title":"Passive GPS Antenna Splitter | 1 Input, 2 Output, TNC Connector","description":"\u003cp\u003eThis loaded DC blocked passive splitter features one input and two outputs for splitting gps RF signals from 1.1 GHz to 1.7 GHz. This splitter is designed to deliver GPS signals within the L1 frequency band to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device up to supply power to the antenna or other up device. The other ports (J2—J4) are DC blocked and loaded with a 200Ω resistor which simulates antenna draw to prevent alarm faults.This passive GPS splitter (EDMO# LDCBS1X2T) has one input and two output ports and has TNC connectors. \u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602829414715,"sku":"LDCBS1X2T","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/ldcbs1x2t_passive-gps-antenna-splitter-2-outputs-1-input-tnc-connectors.jpg?v=1758601774"},{"product_id":"ldcbs1x4-test-equipment-edmo-edmo","title":"Passive GPS splitter | 1 input, 4 output, N Connector","description":"\u003cp\u003eThis loaded DC blocked passive splitter features one input and four outputs for splitting gps RF signals from 1.1 GHz to 1.7 GHz. This splitter is designed to deliver GPS signals within the L1 frequency band to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device up to supply power to the antenna or other up device. The other ports (J2—J4) are DC blocked and loaded with a 200Ω resistor which simulates antenna draw to prevent alarm faults. This passive GPS splitter (EDMO# LDCBS1X4) has one input and four output ports and has N connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602829447483,"sku":"LDCBS1X4","price":540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/ldcbs1x4_ldcbs1x4-jpg.jpg?v=1758601773"},{"product_id":"ldcbs1x4b-pilot-supplies-edmo","title":"Passive GPS Antenna Splitter | 1 Input, 4 Output, BNC Connector","description":"\u003cp\u003eThis loaded DC blocked passive splitter features one input and four outputs for splitting gps RF signals from 1.1 GHz to 1.7 GHz. This splitter is designed to deliver GPS signals within the L1 frequency band to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device up to supply power to the antenna or other up device. The other ports (J2—J4) are DC blocked and loaded with a 200Ω resistor which simulates antenna draw to prevent alarm faults.This passive GPS splitter (EDMO# LDCBS1X4B) has one input and four output ports and has BNC connectors. \u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602829480251,"sku":"LDCBS1X4B","price":474.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/ldcbs1x4b_passive-gps-antenna-splitter-4-outputs-1-input-bnc-connectors.jpg?v=1758601773"},{"product_id":"ldcbs1x4s-test-equipment-edmo-edmo","title":"Passive GPS Antenna Splitter | 1 input, 4 output, SMA Connectors","description":"\u003cp\u003eThis loaded DC blocked passive splitter features one input and four outputs for splitting gps RF signals from 1.1 GHz to 1.7 GHz. This splitter is designed to deliver GPS signals within the L1 frequency band to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device up to supply power to the antenna or other up device. The other ports (J2—J4) are DC blocked and loaded with a 200Ω resistor which simulates antenna draw to prevent alarm faults. This passive GPS splitter (EDMO# LDCBS1X4S) has one input and four output ports and has SMA connectors. \u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602829513019,"sku":"LDCBS1X4S","price":474.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/ldcbs1x4s_passive-gps-antenna-splitter-4-outputs-1-input-sma-connectors.jpg?v=1758601774"},{"product_id":"ldcbs1x4t-test-equipment-edmo-edmo","title":"Passive GPS Antenna Splitter | 1 Input, 4 Output, TNC Connector","description":"\u003cp\u003eThis loaded DC blocked passive splitter features one input and four outputs for splitting gps RF signals from 1.1 GHz to 1.7 GHz. This splitter is designed to deliver GPS signals within the L1 frequency band to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device up to supply power to the antenna or other up device. The other ports (J2—J4) are DC blocked and loaded with a 200Ω resistor which simulates antenna draw to prevent alarm faults.This passive GPS splitter (EDMO# LDCBS1X4T) has one input and four output ports and has TNC connectors. \u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602829578555,"sku":"LDCBS1X4T","price":540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/ldcbs1x4t_passive-gps-antenna-splitter-4-outputs-1-input-tnc-connector.jpg?v=1758601778"},{"product_id":"lmr400-n-test-equipment-edmo-edmo","title":"LMR-400 Ultra-Flexible Communications Cable","description":"\u003cp\u003eThe LMR-400 is an ultra-flexible 50 Ohms coax cable with UV Resistant jacket. It's a great drop-in replacement for RG-8\/9913 cables and is designed for antenna feeder jumper assemblies runs requiring a high-performance, flexible, low loss RF cable.This LMR-400 cable (EDMO# LMR400-N) is 50 feet long and has N connectors.\u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602830070075,"sku":"LMR400-N","price":251.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/lmr400-n.jpg?v=1758601799"},{"product_id":"lnfa1x4-t-test-equipment-edmo-edmo","title":"Low Noise Filtered Amplified GPS Splitter | 1 Input, 4 Output, TNC Connector","description":"\u003cp\u003eThis low noise amplified GPS splitter features one input and four outputs for distributing filtered L1 GPS frequencies indoors with a nominal 0 db gain. A low noise input provides an excellent overall  system noise figure. Padded outputs provide excellent port-to-port isolation and unity gain. Excellency frequency selection of the L1 band prevents interference from other high power radio sources. A five-volt power source connected on any of the RF output will power the splitter as well as an external GPS antenna. If multiple DC sources are connected then a \"\"pick and choose\"\" circuit will select one source to power the system, and the remain ports are switched to a 200Ω resistor to prevent antenna alarm faults.This low noise filtered amplified GPS splitter (EDMO# LNFA1X4-T) has one-input \u0026amp; two-outputs, and has TNC connectors. \u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602830201147,"sku":"LNFA1X4-T","price":765.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/lnfa1x4-t_gps-antenna-splitter-low-noise-1-input-4-output-tnc-connector.jpg?v=1758601806"},{"product_id":"mil-aldcbs-test-equipment-edmo-edmo","title":"Military Amplified GPS Antenna Splitter | 1 Input, 2 Outputs, TNC Connector, Mil-Spec","description":"\u003cp\u003eThis military qualified amplified GPS antenna splitter features a loaded DC blocked, one input and two outputs for splitting RF signals from 1.1 GHz to 1.7 GHz. This splitter is designed to amplify and split signals with the L-band frequency range to provide multiple devices with signal a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2, is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevents alarm faults. Mil-Spec splitters are qualified to the rigorous MIL-STD 810F environmental \u0026amp; MIL-STD EMI standards.This military amplified GPS splitter (EDMO# MIL-ALDCBS) features 1 input and two outputs, and TNC type connectors. Mil-Spec Qualified. \u003c\/p\u003e","brand":"GPS NETWORKING","offers":[{"title":"Default Title","offer_id":50602850976059,"sku":"MIL-ALDCBS","price":835.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/0650\/0923\/files\/mil-aldcbs.jpg?v=1758602307"}],"url":"https:\/\/ecaviation.com\/collections\/brand-gps-networking\/bs1x2-t0mc.oembed","provider":"ECA Solution","version":"1.0","type":"link"}